From ullrich@kapsch.net Fri Jun 20 08:48:54 1997 by hyperreal.com (8.8.5/8.8.5) with ESMTP id IAA29855 for ; Fri, 20 Jun 1997 08:48:52 -0700 (PDT) 20 Jun 97 11:43:57 -0500 20 Jun 97 08:55:26 -0500 Fri, 20 Jun 1997 08:24:26 -0400 (EDT) SMTP; Fri, 20 Jun 1997 14:23:54 +0200 AA19324; Fri, 20 Jun 1997 14:19:56 +0200 Date: Fri, 20 Jun 1997 14:23:48 +0200 From: Peter Ullrich Subject: Re: Roland D5 recovery of presets? Cc: electronica@andrew.cmu.edu X-Attachments: E:\ROL_INIT.TXT; Content-Disposition: attachment; filename="ROL_INIT.TXT" Initialization Procedures ================================================================================= The following list includes instructions for initializing an instrument back to it's original factory condition. In most cases, the factory presets will be restored when you perform this procedure. However, there are several exceptions to this and th Keyboard Synthesizers --------------------- A-JUNO: *Turn Memory Protect switch to Off while unit is turned on the *Turn off, power up holding PORTAMENTO & DATA TRANS . D-5(D): *Press mode until you enter ROM play (l.e.d. will light up). *Hold down EXIT & EDIT, press ENTER. *Hold down A/B, press BANK 7. *To exit, hold down A/B, press EXIT. D-10/20(D):*Power on holding down TUNE/FUNCTION & WRITE. D-50(D): *Power on holding down 0 & DATA TRANSFER. D-70(D): *Power on holding down BANK 8, press ENTER then press WRITE. JD-800: *Press DATA TRANSFER. *Use the up/down cursor buttons to select [FACTORY RESET]. *Press YES. JV-30: *Press CHORUS & REVERB simultaneously, then press VALUE up. JV-80: *Power on holding down NUMBER 8. Press ENTER, then press WRITE. JV-1000: *Power on holding CAPS. Press ENTER, then press WRITE. JW-50: *Press TUNE/FUNC *Press [F5] Factory, [F4] JW Reset, [F3] GS Reset *Press [F4] YES JX-1: *Power on while holding down WRITE & FLUTE. U-20: *NO FACTORY RESET! VK-1000: *Press WRITE to call up the Write Menu. *Press F3 to open Init Menu screen. *Press F4 to Cold Boot screen. *Press ENTER. Synthesizer Modules ------------------- D-110(D): *Power on holding down WRITE/COPY & ENTER. D-550(D): *Power on holding down BANK 2 , NUMBER 6 & ENTER. DS-330: *Power on holding down REVERB and SPLIT. *Press YES. JD-990: *Go to Play screen for either Performance, Patch or Rhythm. *While holding EXIT, press UTILITY. *Press [F6] Execute then [F5] YES. JV-880: *Press the UTILITY button, rotate the DATA dial to [Factory preset]. *Press ENTER two times. MKS-50: *Poly Mode - Power on holding NUMBER BUTTONS 4 & 8. *Mono Mode - Power on holding NUMBER BUTTONS 3 & 7. SB-55: *Power on holding down CLEAR. SC-55: *Power on holding down INSTRUMENT < & > . Press ALL. SC-33: *Power on holding down REVERB and SPLIT. *Press YES. SD-35: *Power on holding CLEAR. Press REC to execute. U-110: *Power on holding down PART & EDIT. U-220: *NO FACTORY RESET! Keyboard Controllers and MIDI Peripherals ----------------------------------------- A-220: *Power on holding down B & MEMORY. A-880: *Power on holding down SIGNAL & MEMORY. A-50/80: *Hold down 1st, 3rd & 4th buttons under display. *Press CHANNEL, then press any cursor button. A-30: *Power on holding down WRITE. This requires 30 seconds. AX-1: *Power on holding down WRITE. AXIS 1: *Turn on. POWER indicator lights and MIDI OUT indicator flashes. *While holding FUNCTION down, press F#0, C#2 & D#2 keys. Guitar Synthesizers ------------------- GR-1: *[ALL]-Power on holding the WRITE/COPY button. *[DEMO]-Power on holding the RECORDER button. *[PATCHES]- Power on holding the PATCH button. *[SYSTEM]-Power on holding the SYSTEM button. *[PROGRAM 1-128]-Power on holding the ENTER button. *[INIT SONG]-Power on holding the EXIT button. GR-50(D): *Power on holding down WRITE, EXT & VALUE UP. GM-70: *Poly Mode- Power up holding PLAY, GENERAL EDIT, & IND EDIT. *Mono Mode- Power up holding TUNE, CONTROL ASSIGN & DATA GR-700: *Power on holding down WRITE. GR-77B: *Power on holding down WRITE. Banks 1-4 will be reset. Signal Processors ----------------- DEP-3/5: *Power on holding down both sides of MEMORY NO button. GP-16: *Power on holding down numbers 6, 7 & 8. *Use FUNCTION to select [2.Factory Preset]. *Press WRITE 3 times. ME-5: *Power on holding pedal numbers 1 & 2 then press WRITE. ME-6: *Power on holding PARAMETER DOWN & LEFT. Press WRITE. ME-10: *Power on holding BANK DOWN pedal then press WRITE. RSP-550: *Power on holding down PEOGRAM UP & DOWN. Press WRITE. SE-50: *Power on holding down PARAM UP & VALUE UP. Press WRITE. SE-70: *Power on holding down the VALUE knob. *Press CURSOR left and use VALUE to select [Standard] or [Guitar] *Press the WRITE button. SDE-330: *Power on holding the PROGRAM & SYSTEM buttons. Press MEMORY. SRV-330: *Power on holding the PROGRAM & SYSTEM buttons. Press MEMORY. SRV-2000: *Power on holding down WRITE & REVERB/NON-LINEAR. VP-70: *Power on holding down PLAY, VOICE EXPANSION & MIDI. FC-100mkII:Power on holding pedal numbers 1, 2 & 8. Drum Machines ------------- CR-80: *Power on holding down DEL & REPEAT. Press ENTER. DR-550: *Power on holding the -1 & +1 buttons, then press START. DR-660: *Press the UTILITY button to enter the utility mode. *Use TEMPO/DATA dial to select [INIT]. Press ENTER. *Use TEMPO/DATA dial and select [ALL]. Press ENTER two times. R-5/8: *Power on holding down PAGE & PARAMETER. *Then press ENTER twice. R-8MkII: *Power on holding CURSOR RIGHT and ENTER. *Press ENTER twice. R-70: *Power on holding down MIDI & ASSIGN. R-8M: *Power on holding down CURSOR RIGHT & ENTER. *Then press ENTER twice. TR-505: *Power on holding down MODE & PATTERN GROUP KEY A. TR-626: *Power on holding down MIDI and TRACK #1. TR-707: *Power on holding down TRACK WRITE & TRACK #1. TR-727 *Power on holding down TRACK WRITE & TRACK #1. TR-909: *Power on holding down TRACK #1 and and PATTERN #1 Percussion Pad Controllers -------------------------- DDR-30: *Power on holding down Number 1. PAD-80: *Power on holding down both VALUE (solid arrows) buttons. PM-16: *None SPD-8: *Power on holding down EDIT. *Press COPY and VALUE display to [F A L]. Press ENTER. SPD-11: *Power on holding ALL/ENTER. Press ALL/ENTER again. TD-7: *Press SYSTEM *Cursor to INT and press ENTER. *Cursor to [HiHat] then use Data Dial to select [ALL]. *Press ENTER two times Intelligent Arrangers --------------------- E-20/30: *Power on holding down WRITE. E-16/36/56*Power on holding WRITE. E-86 *Power on holding WRITE. KR-55: *While holding down MIDI FUNCTION, press the CARD button. KR-500: *While holding down the FROM & TO buttons, press WRITE. KR-3000: *While holding down the FROM & TO buttons, press WRITE. PK-5: *Power on holding down selector 9. PRO-E: *Power on holding down WRITE. RA-50: *Power on holding down WRITE. RA-90: *Factory - Power on holding down WRITE. *GS Format - Power on holding down MIDI SELECT.