From cdmaster@netcom.comFri Oct 20 10:02:15 1995
Date: Thu, 19 Oct 1995 21:47:17 -0700 (PDT)
From: MACHINE MEDIA <cdmaster@netcom.com>
To: DMC <dreams@dabecy.com>
Cc: analogue@hyperreal.com
Subject: Re: six trax


> I have a six trax and I do not know how to utilize more than one voice at a
> time. Can some one fill me in on this??
> Do you assign a midi channel for each instrument.

 There is probably more on this in the archives, and I ain't no MIDI 
expert, but since I do use a six trak I'll take a shot at this.

First off, Omni On is off (did the government invent MIDI?? :) and Mono 
is on. Then set a MIDI channel making sure it is less than 12. The first 
voice will be set to that channel (eg. 11), then the next voice will be set to 
the next number up (eg. 12), etc until the last voice is set to a channel 
equal to five plus the chanell number of the first voice (eg. 11 + 5 = 16).

Does that make sense??  My Six Trak has "Trak 11" which is the latest 
firmware -- I bought it from Whine Country for about $50.  Even including 
that cost, the Six Trak is an outrageous value.

Good Luck!!

PEACE OUT :)
MARK