Date: Sun, 05 Jul 1998 14:04:59 -0400 From: Sylvain Mercille To: machines@hyperreal.org Subject: contribution for PH-830 Roland effect Hello site administratorm, I thaughed that you might want to add this to the info in the Roland/effect section. This could be useful for peaple trying to dexcipher the rather blurry picture of the PH-830. Roland studio system Stereo Phaser PH-830 Rackmount (3 spaces) DESCRIPTION (left to right): 1- LFO/Controllers section: 3-way switch for remote control of phase shift (left or both or right). Remote control 1/4" input jack with LED indicator. Remote inv for control over inversion of waveform with LED indicator. External CV inputs for control of Speed/intensity: left, both, right. Trig external input for LFO. Waveform selector: sine, triangle, sawtooth. with LED indicator for speed. Sweep speed pot. 2- LEFT/RIGHT channels section: For LEFT channel: intensity pot, shift frequency pot (30 Hz to 10 KHz), resonance pot, Phase shift/normal selector, three-way input level switch (-20 or 0 or 20 dB), green LED indicator for signal detection, red LED indicator for overload. For RIGHT channel: On/off inverter switch intensity pot, shift frequency pot (30 Hz to 10 KHz), resonance pot, Phase shift/normal selector three-way input level switch (-20 or 0 or 20 dB), green LED indicator for signal detection red LED indicator for overload 3- INPUT/OUTPUT section: 1/4" input jack for left. 1/4" input jack for right. Output level switch for left channel (0 or -20 dB) Output level switch for right channel (0 or -20 dB) 1/4" left output #1 jack. 1/4" left output #2 jack. 1/4" right output #1 jack. 1/4" right output #2 jack. In the back RCA input jack for left. RCA input jack for right. RCA left output #1 jack. RCA left output # jack. RCA right output #1 jack. RCA right output #2 jack. Handles