From robot@crl.com Tue Dec 20 22:42:44 1994 Date: Tue, 20 Dec 1994 17:46:48 -0800 (PST) From: robot@crl.com To: Heavenly Analogous Subject: Re: OB-8 Sysex ?? On Tue, 20 Dec 1994, Tony Cappellini wrote: > Does anybody know if the OB-8 supports sysex patch dumps ? It depends on the rev. # I have B5. You can tell by going to page 2 by pressing the PAGE 2 button twice and holding the PAGE 2 button down on the second press. Then press and hold the SYNC button. The rev. # will show up on the GROUP and PROGRAM LED's by lighting up... In page 2 the MIDI buttons are as follows: GROUP button A is Enable/Disable program change and program dump. (default: disabled) GROUP button B is Eneble/Disable Pitch bend and modulation controls. (default: disabled) GROUP button C OMNI On/Off. Toggle OMNI status. (default: On - LED is lit) GROUP button D is channel display/select. Press and hold to select/display Basic Channel with PROGRAM buttons. WRITE button is dump current STORED program to MIDI. NOTE: SWITCH "A", "PROGRAM ENABLE", MUST BE ENABLED FOR A DUMP TO OCCUR. Hope that helps -robert ----------------------------------------------*AudioElectronic*----- "If BOTH the SAW and the PULSE switches are on, sonic explorers \ then both sawtooth and pulse waves are selected. \ This combination creates an extremely fat sound." OB-8 manual ----