From audioply@magicnet.net Tue Mar 12 17:46:20 1996
    12 Mar 96 20:46:14 +0500
    12 Mar 96 15:00:01 +0500
Date: Tue, 12 Mar 1996 13:55:33 -0500
From: audioply@magicnet.net (Joseph Rivers)
Subject: Re: Prodigy input mod ?


>> Anyone know of a filter input mod for a Prodigy?!
>


External Audio Input Mod

Very cool and simple , very simple. puts your audio into the VCF and VCA.


a)  solder one end of a 43k  +/- 5% resistor to the negative side of  C25.
        ( the 43k resistor will make so you can handel a 2.2 volt peak to
peak audio signal.)

b) solder a 14 in. wire to the free end of the 43k resistor.

c) drill hole and put in 1/4 in. jack on the back panel.

  (((if you can get a normaled 1/4 jack  it best but dont  kill yourself
looking for it.)
   (( normal  the hot side to ground  so when you plug in the 1/4 cable it
disconcets
       the ground and the hot side. if you don't know what I am talking
about don't
         worry about it , its not a must.)))

d) solder the free end of the wire to the tip end or hot side of the 1/4 jack.

e) try it out. send a beat loop througth it and play .


have fun   :-@


Joseph Rivers
Audio Playground

More info just e-mail I will put more out, it came from the service info
from Moog
in the Audio playground archives.