Date: Fri, 25 Sep 1998 18:34:26 +0100 From: pyrex To: "Brigman, Corley" Cc: analogue@hyperreal.org Subject: Re: [AH] ESQ-M problems In answer to your questions Corley: A soft reset is accomplished by press PARAMETER to put the ESQM into parameter mode press STORAGE to get to the storage page press and hold the down the SCROLL button and while holding this press the MASTER button. Scroll until you get to SOFT RESET With SOFT RESET on the screen press the STORAGE button while holding down the SCROLL button. Software version This screen can be accessed right after the Soft reset. With SOFTWARE VERSION on the screen press the STORAGE button while holding down the SCROLL button. It will now show the version number. Actually, I'm having some problems as well with my ESQM. One of the major ones being in conjunction with SoundDiver, When ever I do anything within the two all SoundDiver manages to do is reset all the values in all my patches to zero. I asked this question on the SoundDiver list already and was told that the ROM version could have a lot do with the problems I'm having (as well as Corley). One guy mentioned he was up at 3.% as a ROM version. I checked and I'm at 1.0! Is this right? Where the hell do I get the latest version from? Does anyone on this list know where I can get this 3.5 (or thereabouts)?. Any help would be appreciated dave Brigman, Corley wrote: > Can anyone tell me how to do a soft reset of an ESQ-M, as well as how > to get to the filter adjustment page? And how to see the rom version? > I'm having a couple of minor problems with mine (pitch bend range > won't go less than 48, and the filters need calibrating). Thanks much! > > corley brigman > intel corp. > corley.brigman@intel.com > > speaking for me, not for intel.