From tmoravan@netcom.comMon Jun 26 14:09:15 1995
Date: Mon, 26 Jun 1995 13:57:24 -0700 (PDT)
From: Tom Moravansky <tmoravan@netcom.com>
To: Machine Media <media@pcnet.com>
Cc: analog <analogue@hyperreal.com>
Subject: Re: Analogue Sequencers

> Who makes or made an analogue sequencer that fits this description:
> 
> 1) 16 steps
> 2) several knobs for setting several CV values for each step
> 3) a trigger or sync in
> 

Serge
Exclusively Analogue (Tony Wride - UK)
Analog Systems  (??? - UK)

out of print sequencers:

ARP 1613
Korg SQ-10
EML-400
WMS


The UK sequencers are priced somewhere above $500.

The ARP sequencers can be found in used book stores for around $300 - $500

The Korg is usually around $200-$400

The EML last two EML sequencers sold for $1500 (to a UK buyer) and $800.  I
bought mine for $50.

WMS - a friend has one, paid around $75 for it.

-- 

_______________________________________________________________________________
Tom Moravansky                                              tmoravan@netcom.com
                             quiet electronics 

From fEEd@maroon.tc.umn.eduMon Jun 26 14:09:39 1995
Date: Mon, 26 Jun 95 16:02:45 CST
From: fEEd <fEEd@maroon.tc.umn.edu>
To: analogue@hyperreal.com
Subject: Re: Analogue Sequencers

On Mon, 26 Jun 1995 13:57:24 -0700 (PDT), 
Tom Moravansky  <tmoravan@netcom.com > wrote:

>out of print sequencers:
>
>ARP 1613
>Korg SQ-10
>EML-400
>WMS

Another good one is the system 104.  The 2 voice sequencer can be modded to 
fit those specs as well.

>The EML last two EML sequencers sold for $1500 (to a UK buyer) and $800.  I
>bought mine for $50.


you make me sick. ;>


Rob 

fEEd/>tEMpESt<\http://www.umn.edu/nlhome/m211/feed/<\fEEd@maroon.tc.umn.edu/>

  "FILTER MAINTENANCE- After every 100 hours of operation apply a sine wave  
  to the output of the FILTER to back flush the trapped overtones to unclog 
  your filter."                                            - EML 101 Manual

From s9506190@minyos.xx.rmit.EDU.AUTue Jun 27 09:56:50 1995
Date: Tue, 27 Jun 1995 10:26:20 +1000 (EST)
From: Damien Miller <s9506190@minyos.xx.rmit.EDU.AU>
To: fEEd <fEEd@maroon.tc.umn.edu>
Cc: analogue@hyperreal.com
Subject: Re: Analogue Sequencers

On Mon, 26 Jun 1995, fEEd wrote:

> On Mon, 26 Jun 1995 13:57:24 -0700 (PDT), 
> Tom Moravansky  <tmoravan@netcom.com > wrote:
> 
> >out of print sequencers:
> >
> >ARP 1613
> >Korg SQ-10
> >EML-400
> >WMS
> 
> Another good one is the system 104.  The 2 voice sequencer can be modded to 
> fit those specs as well.

the 104 is a 2 channel 12 step. (though if you sacrifice a chan, it can 
go up to 24 step)

> >The EML last two EML sequencers sold for $1500 (to a UK buyer) and $800.  I
> >bought mine for $50.
> 
> you make me sick. ;>

Regards,
Damien

/-------------------------------------------------------------------------\
| Damien Miller a.k.a s9506190@minyos.xx.rmit.edu.au a.k.a Silicon Dreams |
|  http://minyos.xx.rmit.edu.au/~s9506190 || old addr: toado@swin.edu.au  |
|                            CAUTION: WEIRD LOAD                          |
\-------------------------------------------------------------------------/